Guten Abend Werte Doktoren, der Serverwelt :D
Bei meinem Servercheck durchlauf ist mir aufgefallen das eine Platte vor einigen Betriebsstunden einen UDMA CRC Error geloggt hat. Laut meiner Rescherche besteht die möglichkeit auf einen (kommenden) Platten defekt oder ein bereits angeschlagenes SATA kabel? Da die Platte doch schon knapp 20.000 Stunden auf den buckel hat, ist mir nun doch etwas mulmig und daher wollte ich mal die meinung der eingesessenen Profis hören :)
Aufrichtigen Dank für Fachmännische Meinung bereits im vorraus!
MFG Markus :D
Bei meinem Servercheck durchlauf ist mir aufgefallen das eine Platte vor einigen Betriebsstunden einen UDMA CRC Error geloggt hat. Laut meiner Rescherche besteht die möglichkeit auf einen (kommenden) Platten defekt oder ein bereits angeschlagenes SATA kabel? Da die Platte doch schon knapp 20.000 Stunden auf den buckel hat, ist mir nun doch etwas mulmig und daher wollte ich mal die meinung der eingesessenen Profis hören :)
Code:
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 3.5" HDD DT01ACA...
Device Model: TOSHIBA DT01ACA200
Serial Number: 43UZR5ZGS
LU WWN Device Id: 5 000039 ff3cdf671
Firmware Version: MX4OABB0
User Capacity: 2.000.398.934.016 bytes [2,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Fri Jan 29 19:31:45 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (15300) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 139 139 054 Pre-fail Offline - 73
3 Spin_Up_Time 0x0007 128 128 024 Pre-fail Always - 295 (Average 295)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 167
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 124 124 020 Pre-fail Offline - 33
9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 19757
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 7
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 168
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 168
194 Temperature_Celsius 0x0002 120 120 000 Old_age Always - 50 (Min/Max 23/62)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 1
SMART Error Log Version: 1
ATA Error Count: 1
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1 occurred at disk power-on lifetime: 17790 hours (741 days + 6 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 d5 eb 8a 50 02 Error: ICRC, ABRT at LBA = 0x02508aeb = 38832875
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
61 88 30 38 f5 50 40 08 5d+12:26:50.099 WRITE FPDMA QUEUED
61 00 28 38 f1 50 40 08 5d+12:26:50.099 WRITE FPDMA QUEUED
61 00 20 38 ed 50 40 08 5d+12:26:50.095 WRITE FPDMA QUEUED
61 b8 18 80 ec 50 40 08 5d+12:26:50.091 WRITE FPDMA QUEUED
61 18 10 68 e9 50 40 08 5d+12:26:50.087 WRITE FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 19686 -
# 2 Short offline Completed without error 00% 19680 -
# 3 Short offline Completed without error 00% 19581 -
# 4 Short offline Completed without error 00% 19493 -
# 5 Short offline Completed without error 00% 17790 -
# 6 Short offline Completed without error 00% 17787 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.MFG Markus :D